{{ $t('shop.all.spaetbestellservice.hinweis') }}
- {{ ergebnis }}
-
{{ ergebnis.artikelnummer }}({{ ergebnis.artikelbezeichnung }})
{{ $t('shop.modules.login.willkommen_sis') }}
{{ $t('shop.display.bestellassistent.anmelden.bereits_kunde') }}
{{ $t('shop.modules.login.anmeldung_unterbenutzer') }}
{{ $t('shop.display.bestellassistent.anmelden.neu_kunde') }}
{{ anzahlArtikel }}
{{ $t('shop.display.index.gespeicherter_warenkorb') }}
{{ $t('shop.display.index.hinweis_gespeicherter_warenkorb', { 'lastChange': $date(new Date(lastChange * 1000), 'datetimeMin'), 'anzahlPositionen': anzahlPositionen }) }}
{{ anzahlPositionen }} {{ $t('shop.modules.warenkorb_wiederherstellung.artikel_anzeigen') }}
{{ $n(e.anzeigeartikel.Artikelmenge, 'menge') }} {{ $t('shop.all.einheit.' + e.anzeigeartikel.Einheit) }}
{{ anzahlPositionen }} {{ $t('shop.modules.warenkorb_wiederherstellung.artikel_ausblenden') }}
HSS-G countersink 90°, DIN 335, 2,8 - 12,4 mm
{{ $t('shop.all.artikelnummer') }}:
BOHR KS 12,4 HSS
{{ $t('shop.display.artikel.beschreibung_headline') }}
Description:
3 cut, right cutting countersink, form C 90°, radial undercut, for burr-free and zero chatter counter sinking, deburring and sinking. Best results with low cutting speed, good centring, good centring and chip removal. For countersinking according to DIN 74 and DIN 75.
Qualities:
HSS-G:
Use for steel, cast steel alloyed and unalloyed (<900 N/mm² tensile strength), grey, malleable, nodular and die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, brass, bronze and plastics.
HSS-G Co 5 (HSS-E):
Use for steel, cast steel alloyed and unalloyed (<1100 N/mm² tensile strength), grey, malleable, nodular and die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, brass, bronze and plastics. Can also be used for hot and cold work steels, as well as rust and acid resistant steels (stainless steels V2A / V4A).
3 cut, right cutting countersink, form C 90°, radial undercut, for burr-free and zero chatter counter sinking, deburring and sinking. Best results with low cutting speed, good centring, good centring and chip removal. For countersinking according to DIN 74 and DIN 75.
Qualities:
HSS-G:
Use for steel, cast steel alloyed and unalloyed (<900 N/mm² tensile strength), grey, malleable, nodular and die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, brass, bronze and plastics.
HSS-G Co 5 (HSS-E):
Use for steel, cast steel alloyed and unalloyed (<1100 N/mm² tensile strength), grey, malleable, nodular and die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, brass, bronze and plastics. Can also be used for hot and cold work steels, as well as rust and acid resistant steels (stainless steels V2A / V4A).
{{ $t('shop.display.artikel.eigenschaften_headline') }}
| Quality | HSS-G |
| Version | single countersink |
| Countersink diameter [mm] | 12,4 |
| Tip diameter [mm] | 2,8 |
| Total length [mm] | 56 |
| Shaft diameter [mm] | 8 |
| for screws | M 6 |
{{ $t('shop.display.artikel.info') }} BOHRKS12,4HSS
| {{ $t('shop.all.gewicht') }} | 31 g / pcs |
| {{ $t('shop.display.artikel.zollwarennummer') }} | 82079091 |
| {{ $t('shop.all.hersteller') }} | RUKO |
{{ $t('shop.all.dokumente') }}
- {{ $t('shop.display.datenblatt.titel') }} ({{ $t('shop.all.englisch') }}) (Print view)
Catalogue page Atlas 9 (Page 989a_n) atlas9_neutral_seiten/989a_n.pdf
{{ $t('shop.all.unverbindliche_richtwerte') }}
Accessories
{{ $t('shop.all.wochenendversand.hinweis') }}
An error has occurred!
An error has occurred, please reload this page and try again.